布拉瑪FD1火焰探測器

使用微信掃描二維碼分享朋友圈，成交更快更簡單！

FD1系列火焰探測器
品牌：Brahma（布拉瑪）

產地：意大利
 
 產品介紹
The combustion process, depending on the type of fuel used, emits more or less light radiation belonging to the ultraviolet, visible or infrared spectrum. Of course, gas oil combustion generates a very bright flame, which is easily detectable by means of sensors using common photocells; nevertheless, at the same time gas oil combustion generates a quantity of substances not completely burnt (unburnt substances), which pollute and also dirty the combustion chamber step by step. By suitably adjusting the combustion, it is possible to solve this problem and improve the flame quality, making it similar to the flame produced by gas, natural gas or propane combustion (blue flame).

Since photocells are not sensitive to blue flame light, in most gas burners the presence of flame is detected by exploiting the ionization principle; to this purpose, you simply need an electrode (electrically isolated metal rod) suitably "immersed" in the flame. This principle is not easily applicable in oil burners, as the electrode immersed in the flame gets dirty quickly (consequently losing its efficiency) and modifies the turbulence in the combustion chamber, thus creating serious problems.

For all these reasons, it is necessary to detect the presence of flame by means of ultraviolet sensitive detectors.

The FDx sensor uses a silicon preamplified active element, specifically designed for blue flame burner applications; the UV light peak detection of this sensor is around 310 nm. Thanks to the incorporation of suitable electronic components, this device can be fitted to the BRAHMA control boxes of the EUROBOX, EUROFLAT, MINIFLAT, MICROFLAT and EUROGAS series (suitable for gas burner applications); moreover, this sensor is particularly well fitted for the control boxes type GR1, GR1/Z and GR2 of the EUROOIL series and for any control boxes of the OIL-SYSTEM series (suitable for oil burner applications).

In order to meet the widest range of market requirements, this device is available in the FD1 version (with front view) and in the FD2 version (with lateral view). Please note that the FDx detector is sensitive to the ultraviolet component of visible light; therefore, its use is recommended in burners fitted with closed combustion chambers and in an application environment perfectly shielded from visible light.
 
 技術參數
主電壓 220-240V / 50...60Hz
功率 1V
可見光波長 290...350nm
可見光角度 8o
最大輸出電流 500uA
工作溫度 -20oC...+60oC
環境濕度 95%

上海銳弓機電設備有限公司  劉先生 M:18702107374 13816031344 15921794872 T: 021-60910744 / 61456847  F:021-60910282 QQ:1713611882  1398924276   本公司為專業燃燒器及配件代理商，代理及經銷的燃燒機整機品牌有：
利雅路燃燒器、百得燃燒器、、意高燃燒器、貴諾燃燒器、百通燃燒器，威索燃燒器,美國豪科,將軍，能量，歐科，歐瑞特，美國midco燃燒機
代理和經銷的燃燒機配件品牌有： 利雅路全套配件、威索全套配件、百得燃燒器全套配件、百通全套配件、意高全套配件、水國全套配件
SUNTEC油泵、DANFOSS油泵、HAGO油嘴、西門子程控器、HONEYWELL程控器、電眼、火焰探測器、點火變壓器、點火電極、油濾器、DUNGS燃氣閥組、伺服馬達、電磁泵、電磁閥、燃燒筒、火焰盤、風葉輪、比例調節儀、重油預熱器等，型號齊全.
上海銳弓機電設備有限公司 專業從事熱能設備行業，工業燃燒及控制、工業爐自動化、煙氣分析和氣體泄漏檢測系統的集成，方案設計，以及設備的供貨、調在業加熱設備、工業熱處理設備、鍋爐、燃燒器等行業的最佳合作伙伴。