立塑聚氨酯（TPU）夾布軟管：采用特殊的擠出技術“一次成型”工藝，由聚醚TPU內膠層、中間纖維、高強滌綸長絲、圓織增強層和TPU外膠層組成。材質環保、耐老化、耐水解、無毒無味、耐高底溫、抗撕拉性好、耐磨、耐刮、產品口徑大、流量大、承壓高、輸送效率高，工作壓力可達1.0-3.0MPa，拉斷強度在15噸以上。比橡膠管和鋼管重量輕、承壓強、輸送效率高、質地柔軟，可盤卷、操作方便、鋪設及撤收速度快、機動靈活、環境適應性強、使用安全可靠和經久耐用、免維護、無需清潔或干燥，使用壽命長，耐磨耗、耐刮擦，可在砂石、水泥等或是其它比較惡劣的環境下使用，內壁光滑，水流阻力小，在承壓狀態下的伸長率幾乎為0，防止水帶扭曲導致水流阻力增大和水帶的磨損，耐熱，耐燃油、化學品、紫外線、臭氧、水、微生物等。
Li SU polyurethane (TPU) fabric hose: using extrusion technology "special forming a" process, from polyether TPU internal rubber layer, intermediate filament 、high-strength polyester filament fabric, circular enhancement layer and TPU cover. The material of environmental protection, aging resistance, hydrolysis resistance, non-toxic and tasteless, high bottom temperature, anti tear property, abrasion resistance, scratch resistance, good product of large caliber, large flow, high pressure, high transmission efficiency, working pressure up to 1.0-3.0MPa, tensile strength of over 15 tons. Compared with the rubber pipe and steel pipe with light weight, strong bearing, high transmission efficiency, soft texture, prehensile, convenient operation, laying and withdrawing speed, flexibility, strong adaptability to the environment, the use of safe and reliable and durable, maintenance free, no need to clean or dry, long service life, wear resistance, scratch resistance in sand, cement, or use other adverse circumstances, smooth inner wall, small flow resistance, the pressure state of elongation is almost 0, to prevent the water led to the distortion of wear, water resistance and heat resistance of hose, fuel, chemicals, ultraviolet light, ozone, water, microorganism.
400-6352-900
